| |
| |
Description |
Price |
Picture |
| Sorry we do not have any borers in stock at the moment |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Description |
Price |
Picture |
COMPARE CYCLON 105 SCREW COMPRESSOR
30 CFM, 4800 hours, 3380 hours under load, acoustic cabinet, 1996 m/c c/c 272 ltr vertical receiver, water trap & regulator. |
£1850.00 |
|
HPC PULSAIR SM11 SCREW COMPRESSOR
40 CFM / 7.5Kw, 1998 m/c, 30341 hrs, 110 psi SWP, complete with 62” x 20” vertical receiver.
|
£1850.00 |
|
FLUIDAIR FRXR SCREW COMPRESSOR
30 CFM, acoustic cabinet, mounted on a 800 ltr horizontal tank, 2000 m/c, 1725 hours, max working pressure 120 psi.
|
£1450.00 |
|
HYDROVANE 504
22 CFM, fully automatic, mounted on 200 litre receiver, 1058 hrs, 1998 m/c. |
£1450.00 |
|
ERP A30-250 COMPRESSOR
30 CFM, mounted on a 250 Ltr horizontal receiver. 2007 m/c. |
£695.00 |
|
HYDROVANE 12, 3HP / 12 cfm, 32696 HRS. |
£550.00 |
|
HYDROVANE 12, 3HP / 12 cfm, 32696 HRS. |
£575.00 |
|
ERP A23/200 22CFM COMPRESSOR
210 ltr horizontal receiver, 12 BAR max pressure. 1995 m/c. |
£550.00 |
|
LEVISS 22 CFM
Fully automatic, mounted on a 60” x 18” horizontal tank S.W.P. 150 psi, fully guarded with water trap.
|
£475.00 |
|
ERP A18/210
12 CFM mounted on a 210 ltr horizontal reciever, fully automatic. |
£375.00 |
|
PNEUMATIC ENGINEERING PETROL DRIVEN COMPRESSOR
Honda GX120 engine, 50 ltr tank, 2012 m/c, probably 8 cfm? |
£425.00 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Description |
Price |
Picture |
JONES AND SHIPMAN 540 AP HORIZONTAL SPINDLE SURFACE GRINDER
18” x 6” mag chuck, power elevation to head, dust extractor & coolant. |
£6500.00 |
|
ABWOOD 5025 HORIZONTAL SPINDLE SURFACE GRINDER
20” X 10” capacity , fitter with 18” x 10” mag chuck, power elevation to head, coolant, dust extraction unit, lo-volt lighting. Ex university. |
£5250.00 |
|
DANOBAT SNOW REH – 500 UNIVERSAL CYLINDRICAL GRINDER
500mm x 125mm ( 250mm dia ), 300mm wheel, internal spindle, inf var speed work head with 3 jaw chuck, tailstock, fixed steady, various grinding wheels and tooling, lo-volt lighting, coolant with filtration unit. |
£5250.00 |
|
STANKO 24” X 8” HORIZONTAL SPINDLE SURFACE GRINDER
Power rise and fall head, incremental down feed, electro mag chuck, coolant, lo-volt lighting. |
£4850.00 |
|
BRIERLEY MODEL ZB 21 DRILL POINT GRINDER
Bench mounted, complete with 3 extra cams, spare new wheels, light. |
£750.00 |
|
| RJH MOOSE 12” x 1 ½” DOUBLE ENDED GRINDER, c/c tool rests and eye shields. choice of 3 |
£625.00 |
|
| CLARKSON Mk 1 TOOL & CUTTER GRINDER 12” x 6” capacity, swivel table c/w centres. Choice of 2. |
£575.00 |
|
| RJH 10” X 1” D.E. GRINDER, c/w eye shields & tool rests. |
£425.00 |
|
| RJH ‘M’ series 10” X 1” D.E. GRINDER, c/w eye shields & tool rests and quench tank. |
£425.00 |
|
| RJH TRIMTOOL TOOLS GRINDER, tilting table, 240 volts. |
£225.00 |
|
FLOTT 8” X 1” DE PEDESTAL GRINDER c/w eye shields and 240 volt lighting. |
£225.00 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Description |
Price |
Picture |
COLCHESTER MASCOTT 1600
8 ½” X 80” Gap bed, speeds 20 – 1600 RPM, 12” 3 jaw chuck with reverse jaws, new 16” 4 jaw chuck, quick change toolpost, 3 point fixed steady, 2 point travelling steady, 2 axis DRO, chuck guard, coolant, rear splash guard. |
£7500.00 |
|
HARRISON M390
50” x 7 ½” gap bed, speeds 25 – 2000 RPM, 3 & 4 jaw chucks, quick change tool post, bed stop, Newall 2 axis DRO, chuck guard, full length rear splash guard, lo-volt lighting, coolant. 1996 machine. |
£7250.00 |
|
COLCHESTER MASTIFF 1400
10 ½” x 60” gap bed, speeds 18 – 1400 EPM, new 12” 3 jaw chuck, 16” 4 jaw chuck, 27” face plate, quick change toolpost, fixed and travelling steadies, 3 ½” hollow spindle, spindle nose bush, imp dial, chuck guard, rear splash guard, lo-volt lighting, coolant. 2 axis DRO. |
£6250.00 |
|
OKUMA LS
60” x 11 ½” gap bed, 4 jaw chuck, 4 way toolpost, 2 axis DRO, splash guard, fixed and travelling 3 point steadies, lo-volt lighting. |
£5250.00 |
|
OKUMA LS
60” x 10 ½” st bed, speeds 35 – 1800 RPM, new 10” 3 jaw chuck, 16” & 20” 4 jaw chuck’s, 4 way toolpost, fixed 3 point steady, Newall 2 axis DRO, coolant.
|
£4850.00 |
|
HARRISON M300
40” x 6 ½” gap bed, speeds 40 – 2500 RPM, 3 & 4 jaw chucks, quick change toolpost, 3 point fixed steady, 2 point travelling steady, dual dials, chuck guard, rear splash guard, lo-volt lighting, coolant. |
£4250.00 |
|
COLCHESTER TRIUMPH 2000
Gap bed 50” x 7 ½”, speeds 25 – 2000 RPM, 3 & 4 jaw chucks, quick change toolpost, rear splash guard, coolant. |
£2250.00 |
|
HARDINGE HC-2 HIGH PRECISION TURRET LATHE
Inf var speeds 125 – 3000 RPM, inf var feeds to saddle, high speed threading attachment, coolant, lo-volt lighting, chuck / splash guard. |
£2250.00 |
|
COLCHESTER MASTER Mk 1
36” x 6 ½” gap bed, speeds 54 – 1200 RPM, dual dials, 3 & 4 jaw chucks, fixed 3 point steady, 4 way toolpost, coolant, chuck guard, rear splash guard, change gears. |
£1250.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description |
Price |
Picture |
BRIDGEPORT SERIES 1 2HP TURRET MILLER
Speeds Inf Var 50 – 3750 RPM, 48” x 9” table with Inf Var feeds and rapids to X axis, chrome slides, 2 axis DRO, splash tray, one shot lube, coolant, lo-volt lighting, fully rebuilt head. 1997 m/c. |
£7500.00 |
|
BRIDGEPORT SERIES 1 2HP TURRET MILLER
Speeds Inf Var 50 – 3750 RPM, 42” x 9” table with Inf Var feeds and rapids to X axis, chrome slides, 2 axis DRO, splash tray, one shot lube, coolant, lo-volt lighting, rebuilt head, 1992 m/c. |
£6250.00 |
|
SEMCO LC-165VS HEAVY DUTY TURRET MILLER
Inf var speeds 50 – 3750 RPM, 48” x 10” table with inf var feed and rapids to X and Y axis and rapids to Z axis, 3 axis DRO, coolant, lo-volt lighting, 40 Int spindle with some tooling, swivel machine vice. excellent condition. |
£5750.00 |
|
RAMBAUDI HEAVY DUTY TURRET MILLER
Speeds 40 – 3500 RPM, 40 Int taper on quill with 6” travel and power down feed, 1300mm x 300mm table with power feed and rapids in all 3 axis, 2 axis DRO, lo-volt lighting, coolant, splash tray. |
£4750.00 |
|
TFY TURRET MILLER
Speeds 50 – 3550 RPM, 40 int quill with power down feed, 54” x 10” table with power feed and rapids to X & Y axis, power elevation to knee on Z axis, 2 axis DRO, quill scale, coolant, lo-volt lighting. |
£4250.00 |
|
ELLIOTT STURDIMILL 1100R UNIVERSAL MILLER
50” x 10 ½” table with feed and rapids in all axis, compound vertical head with 30 int taper, horizontal spindle 40 int with over arm, support and arbour, 35 – 1200 RPM, 3 axis Newal DRO, slotting head, coolant, lo-volt lighting, dual dials, small and large collet Clarkson Autolock chucks. |
£4250.00 |
|
ELLIOTT STURDIMILL 1250 UNIVERSAL MILLER
50” x 10 ½” swivel table with power feeds and rapids in all axis, speeds 31.5 – 1400 RPM, compound vertical head with 40 INT taper, dual dials, coolant, lo-volt lighting, splash guard, safety screen. |
£3750.00 |
|
KOPING VF10A No 3 VERTICAL MILLER
61” x 12 ½” table with power feed and rapids in all axis, swivel head with 50 Int quill, speeds 22 – 2240 RPM, lo-volt lighting, coolant, splash tray. |
£3500.00 |
|
BRIDGEPORT 2JB TURRET MILLER
Inf Var speeds 30 – 3750 RPM, 48” x 9” table with power feed and rapids to X axis, lo-volt lighting, coolant, chrome slides, one shot lube. |
£3250.00 |
|
DUFOUR No 2 UNIVERSAL MILLER
40 int horizontal spindle, 40 int vertical compound head, 21 – 1180 RPM, 43 X 10” table with feed and rapids in all axis, swivel table, horizontal over arm and support, lo-volt lighting, coolant. |
£2500.00 |
|
ADCOCK AND SHIPLEY No2 MILLER
Horizontal spindle with over arm and support, 40 Int swivel vertical head, speeds 30 – 2000 RPM, 40” x 10” table with power feed to X axis, coolant, lo-volt lighting. |
£1750.00 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Description |
Price |
Picture |
SIP MODEL MV4R MEASURING MACHINE
27 ½” x 21” table, complete with optical microscopes, metric & imperial probes, SIP size B clamp set, Watesta 2 axis DRO. Ex MOD unused.
|
£2500.00 |
|
SURTECH / SPADI TN 201.2 TUBE NOTCHING MACHINE
350mm x 75, flat working area, 3 rollers, 2 speeds, 2 spare belts. 2007 m/c with little use.
|
£1500.00 |
|
REYBROOK MODEL 300 HONING MACHINE c/w coolant& selection of hones & stones. |
£1250.00 |
|
HORIZON SMOG MOBILE SM10 INDUSTRIAL ELECTROSTATIC FUME EXTRACTION UNIT
4M hose with light and flow valve, 240 volts, 1994 m/c.
|
£950.00 |
|
H.M.BELT LINISHER *NEW*
TAS150 capacity 150 x 200mm. |
POA |
|
RIDGID 300 PIPE THREADING MACHINE
110 volt, on tristand, complete with 2” head & 4” head, deburrer & cutter. |
£775.00 |
|
BM 150mm x 2000mm BELT LINISHER 350mm x 150mm flat working area. |
£750.00 |
|
SURTECH MARPOL VERTICAL LINISHER WITH FLATBED PLATTEN
10” wide belt, 13 ½” x 11 ½” sliding table, mounted on steel bench. |
£650.00 |
|
HM TAS 100 BELT LINISHER
2000mm x 100mm belt, 350mm x 100mm flat working area. |
£650.00 |
|
| CANNING HEADY DUTY POLISING / BUFFING MACHINE |
£625.00 |
|
VICEROY LINISHING / POLISHING MACHINE
Can be used as horizontal linisher ( 12” x 6” working area ) or vertical linisher, polishing spindle on other side of machine, built in dust extraction unit. |
£625.00 |
|
| BM 75mm x 2000mm BELT LINISHER 350mm x 75mm flat working area. |
£575.00 |
|
GRACO AIRLESS SPRAYER / PAINT PUMP
Model J3K, max working pressure 2300 psi c/w hose and gun ( nozzle missing ) |
£500.00 |
|
| KEARNEY AND TRECKER DIVIDING HEAD, 7 1/2" chuck, 4 1/2" centre height |
£485.00 |
|
|
SAF NERTAZIP 225 PLASMA CUTTER
Air regulator, torch and earth clamp, 16mm capacity. |
£475.00 |
|
| DIVIDING HEAD, 7 1/2" chuck, 4 1/2" centre height |
£450.00 |
|
| BUEHLER TWIN BELT LINISHER 9 ½” x 4” work area, fully guarded. |
£450.00 |
|
RIDGID MODEL 141 4” THREADING HEAD’S
To suit Ridgid 300 2” machine, c/w drive bars & loops, as new. |
£350.00 |
|
TUBE END DEBURRING MACHINE MODEL TDC-3
Mounts onto bench top. |
£350.00 |
|
HYUNDIA HY3100LE ELECTRIC START GENERATOR
2.8 Kw, 110 or 240 volt outputs, as new. |
£325.00 |
|
ELLIOTT SAMSON No1 BAR BENDER 2 ½” wide vice, stand mounted. |
£250.00 |
|
| B.L.S. 415-110 VOLT TRANSFORMER10 KVA, 2 x 32 amp &4 x 16 amp sockets. Choice of 2 |
£250.00 |
|
ACE MINOR 36” X 4” BELT LINISHER, 10” X 4” working area, pedestal mounted, single phase. |
£250.00 |
|
DCE AUTO-DRYTEX DUST EXTRACTOR. Choice of 2. |
£225.00 |
|
ALMI AL2 HAND OPERATED TUBE NOTCHER 49mm / 61mm, 5mm max wall thickness.
sample film
http://www.youtube.com/watch?v=LUsCAcSjHUs |
£225.00 |
|
| CROWN WINDLEY 30” X30” CAST IRON SURFACE TABLE / PLATE |
£185.00 |
|
| ELECTAC MT8E FUME EXTRACTOR 240 volt. |
£125.00 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Description |
Price |
Picture |
WMW MODEL BKR 4x2 A1 TWIN SPINDLE
4 MT, speeds 63 – 1000 RPM, power feed on both heads, tapping on one, R & F heads, 37 ½” x 18” T slotted R & F table, coolant, lo-volt lighting, foot emergency stop bar, chuck guards. |
£4500.00 |
|
WMW SAALFELD BS3AI
3 MT, speeds 180 – 2000 RPM, power down feed, tapping, rise and fall head, 22 ½” x 19”rise and fall swing away table, chuck guard, lo volt lighting. |
£2500.00 |
|
FOBCO 7/EIGHT PILLAR DRILL
2MT, Speeds 51 – 2650 RPM, 15” x 18” T slotted R & F tilting swing away table, chuck and chuck guard. |
£1100.00 |
|
ARBOGA ELECTRISKA PILLAR DRILL
3MT, speeds 125 – 1660 RPM, 18” x 18” T slotted R & F table, R & F head. |
£850.00 |
|
MEDDINGS MF4/3 PILLAR DRILL
2MT, 80 – 4000 RPM, 11” x 10” T slotted rise and fall swing away table, 5” stroke on quill c/w chuck and chuck guard. |
£775.00 |
|
MEDDINGS MF4 PILLAR DRILL
2MT, speeds 80 – 4000 rpm, 11” x 10” T slotted R & F table, 5” stroke, chuck and chuck guard. |
£575.00 |
|
FLOTT HIGH PRECISION BENCH DRILL
12 speeds 450 – 9000 RPM, ¼” chuck, 170mm x 170mm table, rise and fall head. |
£325.00 |
|
SIGOURNEY HIGH SPEED SENSITIVE BENCH DRILL
Speeds 2000-4500 RPM, ¼” capacity chuck. |
£150.00 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Description |
Price |
Picture |
| RHODES / GILL 20 TON HYDRAULIC PRESS 20” x 18” platen, 24” daylight, 12” throat, 8” stroke, pneumatic interlocked guard |
£2500.00 |
|
| ADCOCK & SHIPLEY HEAVY DUTY ARBOR PRESS 10” throat, 15 ½” daylight, stand mounted, indexing base plate |
£ 375.00 |
|
| PEDESTAL MOUNTED ARBOR PRESS 15” daylight, 9 ½” throat, ratchet handle, indexing base |
£ 325.00 |
|
| ARBOR / BROATCHING PRESS 450mm daylight, 220mm throat. |
£ 250.00 |
|
| ADCOCK & SHIPLEY STAND MOUNTED ARBOR PRESS 6 ½” throat, 10 ½” daylight, indexing base plate |
£ 225.00 |
|
| VARIOUS FLY PRESSES ALWAYS IN STOCK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
Description |
Price |
Picture |
KITCHEN AND WALKER E2 4’ RADIAL ARM DRILL
Speeds 25 – 1560 RPM, 4 MT quill with 14” stroke, power locking, power elevation, 36” x 24” box table, dead stop unit, coolant. |
£6750.00 |
|
DONAU DR 32 RADIAL ARM DRILL
Speeds 41 – 1800 RPM, power elevation, power down feed to 4MT quill, power locking, 1070 mm x 400mm T slotted table, tapping, lo-volt lighting, dead stop unit. |
£4850.00 |
|
ASQUITH OD1 4’6” RADIAL ARM DRILL
Speeds 42 – 1130 RPM, power downfeed to 5MT quill, power elevation to arm, 42” x 33” box table, coolant, lo-volt lighting, dead stop unit. |
£4250.00 |
|
MAS VR2 RADIAL ARM DRILL
3MT, speeds 90 – 4500 RPM, power down feed to quill, power elevation to the arm, lo-volt lighting, dead stop unit, box table. |
£2750.00 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Description |
Price |
Picture |
AMADA HA400 AUTOMATIC HORIZONTAL BANDSAW
400mm capacity, manual or automatic operation, inf var blade speeds 15 – 90 M/min, coolant, swarf conveyor. Ex condition. 1990 m/c. |
£9250.00 |
|
ADDISON CB-250A AUTOMATIC HORIZONTAL BANDSAW
10” capacity, 6 blade speeds, shuttle vice infeed, coolant. |
£4500.00 |
|
MEGA BS-250HAS AUTOMATIC HORIZONTAL BANDSAW
10” capacity, 6 blade speeds, shuttle vice infeed, coolant, 6 spare blades. |
£4500.00 |
|
BOMAR ERGONOMIC 290.250 GAC FULLY AUTOMATIC MITRE BANDSAW
Single mitre to 60 deg, fully auto or semi auto operation, 2 speed motor, capacity @ 90 deg 290 x 230mm, @ 45 deg 220mm x 80 mm, @ 60 deg 120mm x 80 mm. |
£4250.00 |
|
TANNEWITZ VERTICAL BANDSAW
35” throat, 15” daylight, inf var blade speed 14 – 253 meters/min, blade welder, air blower, tilting table, table square, fully guarded. Ex MOD. |
£2250.00 |
|
STARTRITE HB225M HORIZONTAL BANDSAW
225mm capacity, quick action vice, 5 blade speeds, coolant. |
£2500.00 |
|
SENATOR 280 M HORIZONTAL BANDSAW
10” capacity, 5 speeds 21 – 84 m/min, 2 spare blades, angular vice, bar stop, coolant, guarded. |
£2250.00 |
|
MACC SB310M HORIZONTAL PULL DOWN MITRE BANDSAW
220 mm capacity, mitre to 45 deg, 2 speeds, quick acting vicebar support, coolant. |
£2250.00 |
|
QUALTERS AND SMITH B10A AUTOMATIC BANDSAW
10” capacity, 2 spare blades, auto / manual, coolant, roller conveyor. |
£2250.00 |
|
RUSCH 10” HORIZONTAL BANDSAW
Inf var blade speed, angular vice, coolant, guarded. |
£2250.00
|
|
RUSCH 10” HORIZONTAL BANDSAW
Inf var blade speed, angular vice, coolant, guarded. |
£1950.00
|
|
SUPER BROWN 300 DV VERTICAL ACTION PULL DOWN CUT OFF SAW
Double mitre, quick action vice with extra work support, 2 speeds and reverse, electric coolant. |
£1750.00 |
|
ADDIS0N 10” HORIZONTAL BANDSAW
Inf var blade speeds, angular vice, bar stop, coolant. |
£1750.00 |
|
MEP CONDOR PULL DOWN CUT OFF SAW
300mm blade, double mitre, single speed, bar support, quick action vice with extra support, coolant. |
£1450.00 |
|
STARTRITE 24-T-10 VERTICAL BANDSAW
24” throat, 10” daylight, 19” x 19” tilting table, 10 blade speeds 17 – 980 M/min. |
£1100.00 |
|
STARTRITE 20 RF VERTICAL BANDSAW
21” x 21” tilting table, 10 blade speeds 50 – 3000 ft/min, 20” throat, 11” daylight. |
£975.00 |
|
STARTRITE 14-S-10 VERTICAL BANDSAW
10 blade speeds 98 – 5600 ft / min, 19” x 19” tilting table, 13” throat, 10” daylight. |
£525.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description |
Price |
Picture |
KEETONA HYDRAFORM Mk4
100” x ¼” capacity, full set of reground tooling, front & back supports, back stop..
|
£14500.00 |
|
ELGA HYDRASHEAR 2.5M X 6.5MM HYDRAULIC GUILLOTINE.
Squaring arm, front supports, power back gauge, rapid blade gap adjustment. |
£6250.00 |
|
EDWARDS TRUECUT 2.5M x 3.25mm DIRECT DRIVE MECHANICAL GUILLOTINE.
3M long squaring arm, front supports, pedal control, interlocked rear back guard enclosure, fluorescent tube lighting. |
£4850.00 |
|
EDWARDS TRUECUT 2M X 3.25mm DIRECT DRIVE MECHANICAL GUILLOTINE
Hand back stop, front supports, pedal control, interlocked rear back guard enclosure, lo-volt lighting. |
£4250.00 |
|
RAINER 250/8 HYDRAULIC CORNER NOTCHER
250mm x 8mm capacity, 2 squaring arms, pneumatic plate clamping, foot pedal control. 1988 m/c. |
£3950.00 |
|
MORGAN RUSHWORTH PB 2050 / 3 UPSTROKING PRESS BRAKE
2M x 35 ton, foot pedal control, 2090mm bottom tool, 2215mm top tool. |
£3750.00 |
|
MORGAN RUSHWORTH 10’ X 14 SWG (3M X 2MM) HAND BOX AND PAN FOLDER
Full set of top tooling, back stop. |
£3750.00 |
|
MORGAN RUSHWORTH PHRW 1025/100 INITIAL PINCH POWERED ROLLERS
1025mm x 100mm rollers, slip bottom roller, foot pedal control, kick stops. 1999 m/c. |
£3650.00 |
|
IMAC VA 200/4 VARIABLE CORNER NOTCHER
200mm x 4mm capacity, 60 – 140 degrees, plate guide, adj cut depth, guarded, 1991 m/c. |
£3500.00 |
|
STRIPPIT SUPER 30/30 SINGLE STATION PUNCHING MACHINE
30 Ton capacity, maximum hole 3.5” x 12 swg, max thickness 1” dia x ¼”, table size 72” x 48”, 3.5m long drop stop back stop with single axis DRO on the Y axis, small and large punching heads with various tooling in cupboard, foot pedal control. |
£3250.00 |
|
COMACA N225/ES HYDRAULIC CORNER NOTCHER
200mm x 6mm capacity, foot pedal control, 2 table squares. |
£2400.00 |
|
EDWARDS 80” X 4” GEARED HAND ROLLS initial pinch, slip end, ex condition. |
£2250.00 |
|
SFM 50” X 3” INITIAL PINCH POWERED ROLLS
Slip bottom roll, foot pedal control, kick stops. |
£2250.00 |
|
* NEW MACHINE *
HS-3S box and pan folder, 1270 x 2 mm capacity |
£POA |
|
MAGNABEND 1250 E MANUAL HAND FOLDER
Magnetic top blade clamping, straight & segmental top blades, 1.6mm capacity, 240 volt. |
£1950.00 |
|
PEDDINGHAUS 225B/45 MECHANICAL PUNCHING MACHINE
26mm diameter x 13mm capacity, hand or foot pedal operation. |
£1850.00 |
|
IMAC FA 200/4 FIXED ANGLE CORNER NOTCHING MACHINE
Plate stop, foot pedal control. 1996 m/c. |
£1850.00 |
|
EDWARDS 80” x 4” GEARED INITIAL PINCH HAND ROLLS, SLIP END. |
£1850.00 |
|
EDWARDS 49” X 12 SWG STRAIGHT HAND FOLDER. |
£875.00 |
|
| EDWARDS 49” X 16 swg STRAIGHT HAND FOLDER ( top blade has 4 cuts into it ) |
£725.00 |
|
| PILOT HYDRAULIC SHEAR capacity 2” x ½”, 4” x ¼”, foot operated, length stop, guarded. |
£650.00 |
|
GABRO MODEL 4M/2 PRECISION HAND LEVER SHEAR.
Capacity 3.3mm mild steel, 2.6mm stainless steel. |
£475.00 |
|
GABRO MODEL 3M/2 PRECISION HAND LEVER SHEAR. 2mm mild steel, 1.6mm stainless steel. |
£350.00 |
|
SAMSON MODEL 5RP/8 HAND LEVER SHEAR with facility to crop flat 8mm, 19mm round, 18mm square, 50mm x 50mm x 5mm angle / T section. |
£325.00 |
|
8” HEAVY DUTY HAND LEVER SHEAR ex British Aerospace |
£235.00 |
|
KENNEDY BAR BENDER MOUNTED ON STAND 3” JAW. |
£225.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description |
Price |
Picture |
BUTLER 21” HIGH PRODUCTION SLOTTING MACHINE
7 ½” – 21” stroke, 2’11” throat, 45” diameter tilting rotary table with feed and rapids to all axis, 6 speeds 9 – 28 SPM, pendant control. |
£12750.00 |
|
WMW STSR400 SLOTTING MACHINE
Maximum stroke 17 ½”, tilting head to 15 degrees both ways, 18-56 strokes per minute, power rapids and feeds to all axis including 800mm rotary table, coolant / cutting oil system, various cutting tools. |
£9750.00 |
|
BUTLER 12” TOOLROOM SLOTTER
Tilting ram, 4 speed 19 – 75 SPM, 24” rotary table, power feed in all axis, 2 axis Newall DRO, large quantity of tooling, lo-volt lighting. |
£6750.00 |
|
BUTLER 8” PRECISION TOOLROOM SLOTTER
Tilting ram, 4 speeds 40 – 105 SPM, 20” rotary table, power feed, lo-volt lighting, some tooling. |
£4250.00 |
|
ROSCHLER & EICHLER
220MM CAPCITY, 3 SPEEDS 45 – 125 spm, 650MM X X250MM Tslotted table, lo-volt lighting, c/w various tolling.
|
£1850.00 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Description |
Price |
Picture |
ESAB L405 ORIGO MIG WELDER WITH L304 REMOTE WIRE FEED UNIT ( 4 ROLLER )
400 AMPS, new roll of 1mm wire, new regulator, Binzel torch. |
£1100.00 |
|
MIGATRONIC FLEX 330 XMI AUTOMOTIVE PULSE MIG WELDER
330 amp, remote wire feed unit, Binzel torch, earth clamp, new regulator and roll of 1mm wire, fully programable. Choice of 2. |
£950.00 |
|
KEMPPI RA350 MIG WELDER
350 amp with FU20 remote wire feed unit with Binzel torch, earth clamp, gauges and 2 x 16 amp 110 volt power outlets. |
£875.00 |
|
ESAB LAG315 STEEL OR ALUMINIUM MIG WITH ESAB A9-MLC30 WIRE FEED / TORCH UNIT
Wire feed controlled from torch, new regulator & 2kg roll of 1.2mm aluminium wire. |
£875.00 |
|
BUTTERS AC/DC 315 TIG WELDER
Complete with torch, earth clamp and regulator.
MIGATRONIC PILOT 2400 HP 240 AMP PULSE DC MMA/TIG WELDER
Fully adjustable with 8 programmable welding settings, complete with all leads and new Migatronic torch and gauges.
MIGATRONIC LTE 200 DC TIG WELDER
200 amp, torch, earth clamp & gauges, 1 / 3 phase ( 240 / 440 volt). |
£875.00
£875.00
£700.00 |
|
MUREX TRANSMIG 413 400 AMP MIG WELDER WITH TRANSMATIC 4X4 WIRE FEED UNIT
4 roller wire feed, Binzel torch, new regulator, new roll of 1mm wire, can control wire feed and amps from remote. |
£975.00 |
|
CEBORA JAGUAR 2500 MIG WELDER
190 amp, with standard Binzel gun & spool on gun for Aluminium welding, gauges & earth clamp. |
£850.00 |
|
MIGATRONIC 250MTE AUTOMIG MIG WELDER
250 amp, Binzel torch, earth clamp, regulator, single phase / 240 volt. As new. |
£825.00 |
|
THERMAL ARC FABRICATOR 330 MIG WELDER WITH REMOTE
330 amp, VF2c remote wire feed unit, Binzel torch, earth clamp & lead, gas regulator, 2 wire feed rollers – 6/8mm & 1.0 / 1.2mm. |
£825.00 |
|
CEBORA PLASMA PROF 52 PLASMA CUTTER
2 power settings, torch and earth clamp & lead, choice of 2. |
£725.00 |
|
HOBART BETAMIG 400 S3 MIG WELDER WITH OLYMPIC 4X4 WIRE FEED UNIT ( 4 ROLLER)
Binzel torch, earth clamp, new roll of 1mm wire, new regulator, can control wire feed and amps from remote.
LINCOLN BESTER MAGSTER 315T MIG WELDER, PDE41MAG WIRE FEED UNIT (4 ROLLER)
Binzel torch, new roll of 1mm wire, new regulator, earth clamp.
KAMANCHI PLATINUM 350 AMP MIG WELDER WITH REMOTE WIRE FEED UNIT ( 4 ROLLER )
Binzel torch, new roll of 1mm wire, new regulator, earth clamp. |
£700.00
£700.00
£765.00 |
|
THERMAL ARC FABRICATOR 330 MIG WELDER
330 amp, Binzel torch, new roll 1mm wire, earth clamp & lead, gas regulator. |
£700.00 |
|
KEMMPI KEMPOMAT 250 AMP MIG WELDER
Compact type welder complete with Binzel torch, earth clamp & gauges. |
£675.00 |
|
NEXUS NXM 325 MIG WELDER
320 amps, Binzel torch with new roll of 1mm wire, earth clamp and lead, gauges. |
£675.00 |
|
MUREX TRDESMIG 230 MIG WELDER
230 amp with Binzel torch, earth lead and gauges. |
£550.00 |
|
STAR WELDA 300C MIG WELDER
280 amp, Binzel torch, earth clamp & lead, gas regulator, 1,, wire fitted with spare roller for .6/.8 wire. |
£500.00 |
|
SAF NERTAZIP 225 PLASMA CUTTER
Air regulator, torch and earth clamp, 16mm capacity. |
£475.00 |
|
MUREX TRDESMIG 253 MIG WELDER
200 amp with Binzel torch, earth lead and gauges. |
£475.00 |
|
OXFORD 350 AMP OIL COOLED WELDER c/w rod holder, earth clamp and leads. |
£450.00 |
|
MUREX TRDESMARC 243 MIG WELDER
200 amp with Binzel torch, earth lead and gauges. |
£425.00 |
|
PLYMOTH T-K-400 PORTABLE WELDING FUME EXTRACTOR
2 speeds, 4meter of hose, 240 volts. |
£250.00 |
|
| HAGGLUNDS 270 AMP DC WELDING GENERATOR, c/w lead, rod holder & earth clamp. |
£250.00 |
|
OXFORD BANTAM 180 AMP OIL COOLED WELDER c/w leads, rod holder & earth clamp. 1 or 3 phase, mounted on trolley
BOC 180 AMP OIL COOLED WELDER c/c rod holder, earth clamp and leads, 240 / 440 volts, mounted on trolley. |
£225.00
£225.00 |
|
| ELEKTAC WELDING FUME EXTRACTOR with hose. |
£125.00 |
|
|
|
|
| |
.jpg){kind=small}
.JPG){kind=small}
